Table of Contents
Advertisement
ATTENTION!
Hold the tool fixture tight when you detach it. The tool
fixture is pressed out of the spindle.
ATTENTION!
The tool clamping system must not be activated when
the machine is operated.
Img.4-12: Extraction tool
ATTENTION!
When using an optional MT4 spindle.
When installing a cold morse taper into a heated-up machine those MT seats tend to
shrink on the morse taper contrary to the quick-releaser tapers.
BF46 Vario | BF46TC
US
Version 1.1.4 dated 2015-3-30
Original operating instructions
Page 39
- Quick Links:
- Electrical Connection
Hide quick links:
Advertisement
Table of Contents
