Diamond SupraExpress 56e Manual page 78

S41 Dial Retry
S44 Error Correction in Use
S45 Reason for Disconnection
S86 Connection Failure Cause Code
Value
Ø
1-3
4
5
6
7
8
9
10
11
12
13
78
Value: Ø-10; default = Ø (No retry)
Type: Non-storable
Ø = No error correction
2 = MNP class 2
3 = MNP class 3
4 = MNP class4
5 = MNP class 5
6 = V.42
7 = V.42 bis
Type: Non-storable
Ø = Lost Carrier
1 = User interrupt
2 = Training failure
3 = Retrain failure
4 = Inactivity time out
5 = Long space disconnect
6 = Negotiation failure
Type: Non-storable
(range = Ø - 255; default = Ø)
S86 records the first event that contributes to a NO CARRIER message.
Failure Cause
Local request
Undefined error code
Carrier loss
No error correction (Remote does not support EC)
No error correction (No response to feature negotiation)
Incompatible protocol (local modem is ASYNC; remote is SYNC)
Incompatible protocol.(No framing technique in common)
Incompatible protocol (Modems could not find common protocol)
Incompatible protocol (Bad response to feature negotiation)
Incompatible protocol (No SYNC information from remote)
Normal Link Disconnect initiated by remote modem
Excessive retransmissions