Result Codes; Result Code Commands; Sample Result Codes - Diamond SupraExpress 56e Manual

C
This section addresses the following topics:
• R C
ESULT ODE
• S R
AMPLE ESULT
• D
ETERMINING
• M R
ODEM ESULT
R C
ESULT ODE
The following commands control result codes.
ATQ Enables result codes (default).
ATQ1 Disables result codes.
ATV Displays result codes as numbers.
ATV1 Displays result codes as words (default).
Reports computer (DTE) rate only as CONNECT: (DTE) (default).
ATW
ATW1 Reports computer rate as CARRIER (DCE), PROTOCOL, CONNECT (DTE).
Reports connection DCE rate only as CONNECT (DCE).
ATW2
S R
AMPLE ESULT
The following result codes are returned when your computer rate is set to 38,400 bps in your
telecommunications software; your modem connects to a 9600 bps modem that supports V.42;
C
OMMANDS
C
ODES
W R C
HICH ESULT
C
ODES
C
OMMANDS
C
ODES
R C
ESULT
U
ODES TO SE
ODES
81