Determining Which Result Codes To Use; Modem Result Codes - Diamond SupraExpress 56e Manual

result codes are enabled (ATQØ); set to be returned as words (ATV1); and set to report throughput,
error correction, and connection rate (ATW1).
CARRIER 9600
PROTOCOL: LAPM
CONNECT 38400
These result codes indicate a 9600 bps connection rate, LAPM (V.42) error correction, and 38,400
bps maximum throughput.
Using the same example, ATWØ would return only CONNECT 38400 (computer rate) and ATW2
would return only CONNECT 9600 (connection rate).
D
ETERMINING
The result code commands you need depend on your software. The factory default settings ensure
compatibility with most software.
M
82
W
R
ODEM ESULT
Word Form
OK
CONNECT (300 bps)
RING
NO CARRIER
ERROR
CONNECT 1200
NO DIALTONE
BUSY
NO ANSWER
CONNECT 0600
CONNECT 2400
CONNECT 4800
CONNECT 9600
CONNECT 7200
R
HICH ESULT
C
ODES
Numeric Form
Ø
1
2
3
4
5
6
7
8
9
10
11
12
13
C U
ODES TO SE