About Jpeg Discs - Rotel RDV-1040 Owner's Manual

RDV-1040 DVD Player
NOTES:
The RDV-1040 does not support "packet
writing (UDF format)" discs.
The RDV-1040 does not support the ID3
tag.
The RDV-1040 supports discs recorded
with multiple sessions.
Some discs may not play due to disc char-
acteristics or recording conditions.
Programmed and random playback func-
tions do not work with MP3/WMA discs.
For MP3, the RDV-1040 only can play
back tracks with the following file exten-
sions; ".MP3," ".Mp3," ".mp3" and
".mP3."
For WMA, the RDV-1040 only can play
back tracks with the following file exten-
sions; ".WMA," ".wma," and any other
combination of upper case and lower case
letters (such as ".Wma").
Time required for reading the disc con-
tents may vary for different discs, depend-
ing on the numbers of groups (folders) and
tracks (files) recorded, etc.
You cannot advance or reverse playback
by pressing or
29
holding down or
26
MP3/WMA disc playback.
The RDV-1040 supports WMA files re-
corded with a bit rate of 48 kbps or higher.
The RDV-1040 cannot play back WMA files
recorded with a bit rate under 48 kbps.
Selecting a Group and Track
When inserting an MP3/WMA disc, after the
disc contents are read, the MP3/WMA CON-
TROL display automatically appears on the TV
screen. You can select a group/track from the
display using the following procedure.
1 Make sure that the black (cursor) bar is in the
left (group) column. If it is in the right column,
press to move it to the left column.
2 Press
group. On the right column, tracks in the
selected group are shown.
3 Press
sired track, then press ENTER
(PLAY)
or
Press the numeric buttons
specify a desired track number.
Examples:
To select 5: press 5.
To select 23: press +10, +10, then 3.
To select 40: press +10, +10, +10, then 10.
The RDV-1040 starts playback from the selected
track.
You can also select a desired track by press-
ing to move the black bar to the right (track)
column then using
NOTES: If an MP3/WMA file name in-
cludes any 2-byte character, the RDV-1040
cannot show the file name correctly.
Only MP3/WMA files are shown on the
MP3/WMA CONTROL display.
, or by
10
The order of groups/tracks shown in the
during
8
MP3/WMA CONTROL display may differ
from the order shown on your personal
computer when you access the disc on your
computer.
Direct Selection
You can select a desired group directly by speci-
fying the group number.
1 During playback or while stopped, press
TITLE/GROUP
group display area of the display window.
2 Press the numeric buttons to specify a de-
sired group number.
Examples:
To select 5: press 5.
To select 23: press +10, +10, then 3.
To select 40: press +10, +10, +10, then 10.
Specify the group number within several sec-
onds after pressing TITLE/GROUP (i.e. while
the display window shows [—]). The RDV-1040
starts playback from track 1 of the selected
group.
3 Press the numeric buttons to specify a track
number. The RDV-1040 starts playback from
the specified track. You can also use
/
of the numeric buttons.
/ to move the bar to a desired
or to select a de-
8
26
or
34
.
28
to directly
4
/ .
. [—] is shown in the
7
or / to specify a track, instead
20
Repeat Playback
During playback or while stopped, press RE-
PEAT . Each time you press REPEAT, the
3
repeat mode changes as follows.
On Screen Display
If you press REPEAT while stopped, you need
to press ENTER or
34
repeat play.
To stop repeat playback press ■ (STOP)
Note that the repeat mode remains active.
To quit repeat playback –
During playback, press REPEAT
repeat icon is shown on the display window.
While stopped, press REPEAT until repeat mode
indication on the MP3/WMA CONTROL dis-
play goes off.
NOTE

About JPEG Discs

The RDV-1040 can play back JPEG files on a
home recorded CD-R/RW disc. We refer to a
disc that contains JPEG files as a "JPEG disc"
in this manual.
Note that if a disc contains both of MP3/WMA
files and JPEG files, you can only play back
files of the type selected by the MP3&WMA/
JPEG setting in the PICTURE preference display
On a JPEG disc, each picture is recorded as
a file. Files are sometimes grouped into fold-
ers by category, etc.
• A folder which has one or more files is re-
garded as a group.
• A folder which does not directly contain any
files is ignored.
(PLAY) to start
28
.
9
until no
3