Advertisement
Quick Links
INSTRUCTION MANUAL
MODEL T100
CRAFT MATERIALS
CUTTER
INSTRUCTIONS AND OPERATION MANUAL
32in (81cm) capacity materials cutting system
with fixed and rotary cutters.
For best results use only
authentic Logan blades
Uses Logan Replacement
Blades 270 and T10
CAUTION!!
CUTTING BLADES ARE SHARP
Purchase Date
ID Number (on bottom of board)
Date (on bottom of board)
LoganGraphic.com
L2335 12-16
Advertisement
Related Manuals for Logan T100
Summary of Contents for Logan T100
- Page 1 INSTRUCTION MANUAL MODEL T100 CRAFT MATERIALS CUTTER INSTRUCTIONS AND OPERATION MANUAL 32in (81cm) capacity materials cutting system with fixed and rotary cutters. For best results use only authentic Logan blades Uses Logan Replacement Blades 270 and T10 CAUTION!! CUTTING BLADES ARE SHARP...
- Page 2 Warranty Logan Graphic Products, Inc. (“Logan”) warrants the T100 Craft Materials Cutter to be free from defects in parts and workmanship for a period of two years from the date of original purchase. Logan warrants that it will either repair or replace, in its sole discretion, any necessary replacement parts found to be defective.
- Page 3 After cutting, tighten safety screw to lock safety cover over blade. Loosen Fixed Knife (Fig. 6) Loosen knob. Fig. 6 Adjust blade depth 1/16 setting: chipboard, posterboard, matboard 3/16 setting: cardboard, foamboard Loosen 1/16 setting 3/16 setting Logan Graphic Products Inc., 1100 Brown Street, Wauconda, IL 60084 847-526-5515 LoganGraphic.com...
- Page 4 Rotate bar back to front. (Fig. 15) Slide new end of bar back into slot. 45˚ 45˚ Fig. 13 Fig. 11 Fig. 10 180˚ Fig. 14 Fig. 12 Fig. 15 Logan Graphic Products Inc., 1100 Brown Street, Wauconda, IL 60084 847-526-5515 LoganGraphic.com...