Samsung CLX-6250FX Service Manual page 105

● Code
01-006
01-018
● Symptom
The paper from the tray2 has not reached to a feed sensor within a predetermined period of time after pick up.
● Possible Cause
1. Pickup roller rubber is worn out.
2. Pickup Clutch does not work.
3. Feed Sensor is defective.
● Troubleshooting method :
1. Take out the 2nd cassette and remove the jammed paper.
2. If the pick up roller does not rotate, check the Gear Pick up(JC97-03228A). If it is defective, replace it.
3. If the pick up roller rotates but the paper is not feeding, replace the Clutch-Feed(JC97-03270A).
4. Check the connector is plugged in properly on CN9 connector on Main PBA
5. Check the sensor and connector in SCF.
Service Manual
Alignment & Troubleshooting
● Error message
Paper jam in tray 2
4-34
Samsung Electronics