Ricoh PRO C900 Operating Instructions Manual page 23

5. [Energy Saver] key
Press to switch the machine into and out of Low Power mode.
See "Saving Energy".
6. [Clear Modes] key
Press to clear previously entered print job settings.
7. [Stop] key
Press to stop a job in progress.
8. [Start] key
Press to start printing.
9. [Clear] key
Press to delete an entered number.
10. [ ] key (Enter key)
Press to enter a numerical value.
11. Number keys
Use to enter the numbers.
12. Data In indicator (printer mode)
Lights up when the printer is receiving data.
13. [Registered Program] key/[Other Function] key
Calls up registered functions.
14. Function status indicators
Show the status of the printer function.
• Green: active.
• Red: interrupted. Press the function key to change the display, and then follow the instructions that appear.
15. Function keys
Press to display the operation screen of a printer function.
16. [Counter] Key
Press to check or print the total number of copies made.
See "Counter", General Settings Guide.
17. [User Tools] key
Press to change the default settings and conditions to meet your requirements.
See "Accessing User Tools (System Settings)", General Settings Guide.
18. [Tray Paper Settings] key
Specify settings for the tray to which prints are delivered.
19. Display panel
Shows function menus, error messages, and the machine's operation status.
• You can adjust the angle of the control panel.
24
Draft 2008/02/07
2