Ricoh PRO C900 Operating Instructions Manual page 2

Introduction
This manual contains detailed instructions and notes on the operation and use of this machine. For your safety and
benefit, read this manual carefully before using the machine. Keep this manual in a handy place for quick
reference.
Important
Contents of this manual are subject to change without prior notice. In no event will the company be liable for direct,
indirect, special, incidental, or consequential damages as a result of handling or operating the machine.
Note:
Some illustrations in this manual might be slightly different from the machine.
Certain options might not be available in some countries. For details, please contact your local dealer.
Depending on which country you are in, certain units may be optional. For details, please contact your local dealer.
Laser Safety:
CDRH Regulations
This equipment complies with requirements of IEC60825-1:2001 for class 1 laser product. This equipment
contains multiple AlGaAs laser diodes, max. 111(rating 38) - milliwatt, 770 - 810 nanometer wavelength for each
emitter.
The power intensity from the laser unit is 1.33 - milliwatt.
This equipment does not emit hazardous light, since the beam is totally enclosed during all customer modes of
operation and maintenance.
Caution:
Use of controls or adjustments or performance of procedures other than those specified in this manual might result
in hazardous radiation exposure.
Note:
Two kinds of size notation are employed in this manual. With this machine refer to the inch version.
For good copy quality, the supplier recommends that you use genuine toner from the supplier.
The supplier shall not be responsible for any damage or expense that might result from the use of parts other than
genuine parts from the supplier with your office products.
Power Source
208-240V, 50/60Hz, 24A or more
Please be sure to connect the power cord to a power source as above. For details about power source, see
Troubleshooting.
Draft 2008/02/07