Advertisement
III: C
Plug in the loads to output receptacles on the rear panel of the UPS. Simply turn on the power switch of UPS
unit, and devices connected to the UPS will be protected by UPS unit.
Do not attach a power strip or surge suppressor to the UPS.
I : C
AN
M
P
S
P
Connect for example a single modem or phone line into surge-protected "IN" outlet on the back panel of the
UPS unit. Connect from "OUT" outlet to the computer with another phone line cable.
: C
USB C
To monitor the UPS status, such as unattended UPS shutdown and start-up, by using bundled software,
please connect the UPS and PC with US cable included.
NE ER connect a
or
to the
UPS unit,
-
EN
may cause the damage of the unit.
I: T
O O
U
Turn on the UPS unit by pressing the power switch. Turn off the UPS unit by pressing again the power switch.
8
Advertisement
