Technical Specifications - Elation PIXEL DRIVER 4000 User Manual

T E C H N I C A L S P E C I F I C A T I O N S
CONTROL / CONNECTIONS
Manual RGB Mode
Internal Programs
Art-NET | sACN | Kling-NET
(2) RJ45 Ethernet Ports
(4) 4pin Power/Data Outputs
SIZE / WEIGHT
Length: 16.7" (425mm)
Width: 11.9" (301mm)
Vertical Height: 2.9" (74mm)
Weight: 9.5 lbs. (4.3 kg)
ELECTRICAL / THERMAL
AC 100-240V - 50/60Hz
800W Max Power Consumption
-4° to 113°F. (-20° to 45°C)
APPROVALS / RATINGS
CE |
Specifications and improvements in the design of this unit and this manual are subject to change without any prior written notice.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired
operation.
FCC RADIO FREQUENCY INTERFERENCE WARNINGS & INSTRUCTIONS
This product has been tested and found to comply with the limits as per Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This device uses and can radiate radio frequency energy
and, if not installed and used in accordance with the included instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to
radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the
interference by one or more of the following methods:
•
Reorient or relocate the device.
•
Increase the separation between the device and the receiver.
• Connect the device to an electrical outlet on a circuit different from which the radio receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
www.elationlighting.com
18