Over Scan
1
Use
to select Over Scan, then use
To set Over Scan to Off
Off
To set Over Scan to On
On
Source Label
Create labels for the devices connected to your TV.
1
Use
to select Source Label, then press OK.
2
Use
to select the source and use
Antenna / Cable / Satellite / DTV / DVD / Blu-ray / HD-DVD /
XBOX / Wii / PS3 / Game / Computer / VCR / DV / Custom.
Source Label
TV
Video
HDMI1
HDMI2
MULTIMEDIA
Move
Select
to select the item.
to select Default /
Default
Default
Default
Default
Default
Adjust
Back
Other Settings
Set the parameter of audio only, no signal power off and no operation
power off.
1
Use
to select Other Settings, then press OK.
2
Adjust the following items.
Audio Only
Play the audio with the picture turned off.
To set Audio Only to Off
Off
When you turn the Audio Only on and exit the
OSD menu, the panel will be dark, and then
On
press any key to exit the Audio Only status.
Restore Default
Change power on options or reset TV to factory default.
1
Use
to select Restore Default, then press OK.
2
Use
to select Yes, then press OK.
Setup Wizard
Set the first time installation.
1
Use
to select Setup Wizard, then press OK.
Only at TV source, the selection is displayed.
For detail please refer to Setup wizard
30
.
English
p. 15.
Continued on next page.