Pride Mobility 614 Owner's Manual page 29

SEAT ROTATION ADJUSTMENT
The seat rotation lever will secure the seat into several
positions.
1. Pull upward on the seat rotation lever to disengage the
seat. See fi gure 18.
2. Rotate the seat to the desired position.
3. Release the lever to secure the seat into place.
ARMREST ANGLE ADJUSTMENT
Armrest angle of your scooter can be adjusted upward or
downward by turning the adjustment dial. See fi gure 18.
NOTE: The armrests also pivot upward to make getting on
and off of your scooter easier.
FRONT-TO-BACK SEAT ADJUSTMENT
You can reposition the seat forward or rearward to adjust the
distance between the seat and the tiller.
1. Move the seat sliding lever located at the lower left side
of the seat outward. See fi gure 18.
2. While holding the lever out, slide the seat forward or
rearward.
3. Release the seat sliding lever once the seat is in the
desired position.
ACCESSORY BRACKET
The rear-mounted accessory bracket allows you to attach
a personal accessory such as a basket, walker holder, or
oxygen tank to the back of your scooter. Utilize the detent
pin to securely mount your item to the accessory bracket.
See fi gure 18. See your authorized Provider for details.
SEAT HEIGHT ADJUSTMENT
The seat can be repositioned to several different heights. See
fi gure 19.
1. Remove the seat and rear shrouds from your scooter.
2. Remove the seat height adjustment bolt.
3. Raise or lower the upper seat post to the desired seat
height.
4. While holding the upper seat post at that height, align the
adjustment holes of the upper and lower seat posts.
5. Insert the seat height adjustment bolt through the locating
holes of both the upper and lower seat posts.
6. Reinstall the nut onto the seat height adjustment bolt and
tighten.
7. Reinstall the rear shrouds and the seat.
Full-size Scooter Series
V. C O M F O R T A D J U S T M E N T S
IDENTIFICATION KEY
1. UPPER SEAT POST
2. NUT
3. SEAT HEIGHT ADJUSTMENT BOLT
4. LOWER SEAT POST
1
3
4
Figure 19. Seat Height Adjustment
IDENTIFICATION KEY
1. BOOT
2. UPPER SEAT POST
3. COMFORT SPRING
weight capacities: 0-220 lbs. (0-90.72 kg)
220-400 lbs. (90.72-181.44 kg)
4. SPACER
5. SHOULDER BOLT (210 IN • LB [24 N • M])
6. LOWER SEAT POST
7. WASHER
8. NUT
1
2
3
4
5
6
Figure 20. Seat Height Adjustment - Comfort
Seat Post
2
8
7
29