Key Lock Function - Sangean DPR-39 User Manual

3. Stations which are already stored in the presets may be
over written by following the above procedure.
Note:
The radio station presets are retained in memory when the
radio is switched off.
Recalling a preset-FM & DAB
1. Select the required operating mode as previously described.
2. Momentarily press the required Preset button. Your radio
will then tune to the station stored in the selected preset
memory. The chosen preset number is also shown in the
radio display, e.g. 'P2'.

Key lock function

The key lock function is used to prevent unintentional
operation of the radio.
1. Key lock switch is located on the back of the radio. When
the key lock switch is set to LOCK, the power button, volume
control, preset buttons and jog wheel will be disabled. If any
buttons are pressed when the key lock function is set to
lock, display will show "Button Locked" for a few second.
2. To switch off the key lock function switch the key lock button
to opposite position. The key lock function will be disabled.
GB
14