Initial Setup; Set Language; Set Date And Time; Set Automatic Recording - Uniden DC40GT Owner's Manual

In certain models of cars, the cigarette lighter keeps providing power
even when the engine is off. Be sure to remove the car charger
or disconnect the device when leaving the vehicle to prevent
draining the vehicle battery. Check your vehicle's owner's manual to
determine if this applies to your vehicle.

INITIAL SETUP

Set Language

Follow these procedures if you need to change the language on your
device.
1. Press MENU to access the Menu system.
2. Press ▼ to scroll to
OK
.
3. Press ▼ to scroll to
4. Press ▲/▼to scroll to the desired language and press
select it.
5. Press MENU to leave that Menu page.

Set Date and Time

The DC40GT receives date and time information from the GPS
satellite if the time zone setting (UTC) is NOT set to OFF. If the UTC
is set to OFF, the device will then look for a manually-set date and
time. Set the date and time through

Set Automatic Recording

Activate the Automatic Recording function to have the device start
recording when the vehicle's engine is turned on. Activate the
function before using the device.
1. Press MENU to access the Menu system.
2. Press ▼to scroll to
6
System Setting
Language
then press OK.
System Setting/DateTime
Video Setting
if necessary and then press
and press OK.
OK
to
.