Important Safety Instructions Uniden does not represent this product to be waterproof. Do not expose this product to Rain or Moisture. NOTE This product is intended for use in a motor vehicle. Don’t install the device where it will block the driver’s view of the road (including the mirrors!) or the deployment of the airbag.
Power On ....................... 9 Power Off ....................... 9 Record Mode ...................... 10 Photo Mode ....................... 12 Playback Mode ....................13 General Settings ....................14 Connecting to a PC ..................15 Troubleshooting ............16 Important Information ..........17 Warranty ................18 UNIDEN iGO CAM 30 Vehicle Recorder...
USB Charging Cable • Owner’s Manual • If any item is missing or damaged, contact your place of purchase immediately. Never use damaged products! • Need help? Get answers at our website: www.uniden.com.au for Australian model. UNIDEN iGO CAM 30 Vehicle Recorder...
Controls & Indicators UNIDEN iGO CAM 30 Vehicle Recorder...
Page 6
Press & hold for 5 seconds to turn power off. Card Slot Insert micro SD Card. Bracket Slot Slot in the sticker mount bracket. Speaker Records sound. Lens *Record Mode is when the device is not recording. UNIDEN iGO CAM 30 Vehicle Recorder...
Sticker mount is difficult to remove after it is installed and will not stick well on a curved/textured or wet surface. NOTE Do not install the product in a location where it can obstruct the driver’s field of vision. NOTE UNIDEN iGO CAM 30 Vehicle Recorder...
To remove the card from the slot, press the edge of the SD card inwards for it to pop out and then pull it out of the slot. Uniden only recommends using good quality MLC/SLC micro SD cards and rate for dash cam use. Please check with the SD card manufacturers for more information.
If you wish to switch the device back on, press and hold the power button for at least 3 seconds. Only use the USB Car Charger Adaptor and USB cable that comes with your device. Any other adaptor might damage the device. NOTE UNIDEN iGO CAM 30 Vehicle Recorder...
Press twice to display the General Settings menu. Press the relevant UP and DOWN keys to scan through the various settings and then press OK to select. Press the RETURN button to exit the Menu. UNIDEN iGO CAM 30 Vehicle Recorder...
Page 11
30 seconds each time it wakes up. Parking Mode only works properly if the battery has enough power. G-Sensor This feature detects significant or sudden movement and automatically locks the current recording. UNIDEN iGO CAM 30 Vehicle Recorder...
RETURN button to access Photo settings. Photo Settings Setting Description Photo Resolution Define the image resolution. Image Quality Define the quality of the images you want to capture. Stamp Enable/Disable the date and time stamp on the image files. UNIDEN iGO CAM 30 Vehicle Recorder...
All. Choose the option, based on whether you want to lock/unlock the files on the SD card, and then press OK. To return to Record Mode, press and hold the RETURN button. Press OK to start recording. NOTE UNIDEN iGO CAM 30 Vehicle Recorder...
Use this option to format the SD card. (All files will be permanently erased.) Default Setting Resets the device to factory settings. Note that restoring defaults will not erase data on the SD card. Version Display the device firmware version. UNIDEN iGO CAM 30 Vehicle Recorder...
Connecting to a PC The iGO CAM 30 can be connected to a PC by using a USB data cable (not supplied). The supplied USB cable is for charging and supplying power only. When the device is connected to the PC, Mass Storage is displayed on the device’s screen.
Audio Codec Storage microSD (up to 32GB), Class 10 and above Power Input 5V 1A Battery Capacity Li-ion 120mAh Operating Temperature 0°C ~ 60°C Storage Temperature -10°C ~ 70°C Working Humidity 10 ~ 80% UNIDEN iGO CAM 30 Vehicle Recorder...
(“Uniden Aust”). Terms of Warranty: Uniden Aust warrants to the original retail purchaser only that the iGO CAM 30 (“the Product”), will be free from defects in materials and craftsmanship for the duration of the warranty period, subject to the limitations and exclusions set out below.
Page 19
Product, together with satisfactory evidence of your original purchase (such as a legible copy of the sales docket) to Uniden at the address shown below. You should contact Uniden regarding any compensation that may be payable for your expenses incurred in making a warranty claim.
Need help?
Do you have a question about the iGO CAM 30 and is the answer not in the manual?
Questions and answers