Disassembly and Reassembly
4. Push the holder pulley and remove the belt only.
3-17 Roller Holder
1. Before you disassemble the roller holder you
should remove:
* All covers (See page 3-1, 3-9, 3-10)
* Scanner unit assembly (see page 3-2)
* Engine unit (See page 3-10)
* FPC holder assembly (See page 3-11)
* Cartridge assembly (See page 3-12)
2. Unlatch the holder by pushing the parts
hooked to the main frame using a sharp tool.
3-14
5. Remove two screws securing the carrier motor
and take out the motor from the main frame.
3. Pull the holder downward and take it out from
the main frame.
Samsung Electronics