Scanner Unit Assembly - Samsung SCX-1000I Service Manual

Disassembly and Reassembly

3-3 Scanner Unit Assembly

1. Raise the scanner support to hold up the scanner
unit and remove the stopper holding the scanner
unit.
2. Remove two screws and take out the PCB cover.
3-2
3. Unlatch the harness cover by pushing on the
bottom of the tabs upward, then remove the
cover.
Unlatch the cover.
2
1
4. Unplug the harness and one connector from
You should connect or remove the FPC cable
vertically to avoid the FPC cable pin damage.
the main PBA.
FPC cable
Samsung Electronics