Table of Contents
Advertisement
3-6 Smart board
1. Before you disassemble the smart board, you
should remove:
* OPE panel (See page 3-6)
2. Unplug one FPC cable from the PCB.
3-7 Main PBA
1. Open the scanner unit.
2. Remove two screws securing the PCB cover.
Take out the cover from the main frame.
Samsung Electronics
3. Remove two screws securing the board and take
the board out.
3. Remove two screws securing the main PBA to
the main frame and unplug all connectors. Take
out the main PBA.
You should connect or remove the
FPC cable vertically to avoid the
FPC cable pin damage.
Disassembly and Reassembly
3-7
Advertisement
Table of Contents
