Export A Flight Plan To An Sd Card - Garmin G1000 Reference Manual

Flight Planning
3) The default insertion point is at the end of the flight plan. If the selected
waypoint is to be placed anywhere other than the end of the flight plan,
press the FMS Knob to activate the cursor. Waypoints are inserted
the cursor. Turn the large FMS Knob to select the desired insertion point.
4) Press the LD WPT Softkey. The selected waypoint is inserted at the selected
point. The default user waypoint naming is USR000, USR001, USR002, and
so on.
5) To change the user waypoint name, follow the procedure for modifying a user
waypoint.

EXPORT A FLIGHT PLAN TO AN SD CARD

NOTE: See the Annunciations & Alerts section for flight plan export message
descriptions.
1) Insert the SD card into the top card slot on the MFD.
2) Press the FPL Key to display the Active Flight Plan Page on the MFD.
3) Turn the small FMS Knob to select the Flight Plan Catalog Page.
4) Press the FMS Knob to activate the cursor.
5) Turn the large FMS Knob to highlight the flight plan to be exported.
6) Press the EXPORT Softkey.
7) Press the ENT Key to confirm the export.
38
Garmin G1000 Cockpit Reference Guide for the Piper PA-46 Meridian
ABOVE
190-01842-00 Rev. A