Service And Maintenance Access; Intended Use Of The Unit - York VCH 20A User Manual

1 User manual
1.2

Intended use of the unit

1.1.5 Service and Maintenance Access

The units are fitted with access panels with 1/4 turn
closures on the control panel and levers offering fast,
safe access to all components requiring service or
maintenance.
Access to the control circuit is independent to the
cooling system of the unit.
The unit is fitted with connections for specific
manometers for easier reading of cooling circuit
pressures.
1.2 Intended use of the unit
The VCH/VIR series of units is exclusively designed for the air conditioning of buildings and properties.
Therefore, the unit has a cold generating system, a heat pump and, as optional, auxiliary electrical
resistors and hot water coil. Depending on the version that forces air to circulate through ducts to adjust
the temperature of the building or property where it is installed. The air conditioning unit has a start-up
and setting mechanism (by means of a thermostat) to manage its operations.
The unit should only be used for the purposes for which it was designed and built. Johnson Controls Inc.
shall not be considered responsible for any damage caused by inappropriate use or maintenance of the
unit that is any way inconsistent with that described in this document or others specifically provided with
the unit.
Any use other than air conditioning will be considered inconsistent.
6
1