Cnc Piranha Fx/Xl Operations Safety Instructions - Next Wave Automation CNC PIRANHA XL Owner's Manual

Pause or Stop on the Piranha FX/XL
The second is either the on/off switch on the CNC Piranha FX/XL
Power Button on Controller Interface
Hitting either will immediately stop the CNC Piranha FX/XL movement. This will also stop the
router if it is plugged into the Controller Interface. (only available on XL models)
Third is turning off the power strip; the power strip's on/off switch serves the same purpose as
the E-Stop button on the Piranha FX/XL Controller Interface. For this reason, it is recommended
that you use power strips with an on/off switch.
Power Strip On/Off Switch

CNC Piranha FX/XL Operations Safety Instructions

1. Read and follow all safety and operating instructions before using the CNC Piranha FX/XL.
This includes reading the manual for the router that will be mounted on your CNC Piranha
FX/XL. Take the time to orient yourself to the Piranha FX/XL and the workflow steps.
April 2018
CNC Piranha FX/XL | 5