Cnc Piranha Fx/Xl Lcd Pendant; Cnc Piranha Fx/Xl Assembly Instructions - Next Wave Automation CNC PIRANHA XL Owner's Manual

CNC Piranha FX
CNC Piranha XL

CNC Piranha FX/XL LCD Pendant

The CNC Piranha FX/XL LCD Pendant stores the project's tap file (instructions) on a flash drive
and controls the movement of the X, Y, and Z axis. The LCD Pendant is designed to be a
standalone unit so that it is no longer necessary to expose your computer to a dusty shop
environment. In the event, you wanted to run it from your computer the Controller Interface
may be connected using a USB cable plugged into a USB 2.0 capable plug. This will require you
to download and use the Piranha FX/XL Control Panel software is to communicate to the
Interface. Just like the LCD Pendant you can use this interface to jog (position) the gantry and
router, load a project (tap) file, and run the project.

CNC Piranha FX/XL Assembly Instructions

Unpack the CNC Piranha FX/XL machine and verify that all items are present.
• CNC Piranha FX/XL
April 2018
X: 19.5" Y:
20.5"
Z: 18" 12" x 18"
X:19.5" Y: 30.5"
Z: 24" 12" x 30"
CNC Piranha FX/XL Specifications
X: 12"
Y: 13" T-Slotted
Z: 3" Extruded
Aluminum
X:12"
Y:24"
Z: 4"
CNC Piranha FX/XL | 9
100 ipm