Safety; Emergency Stop - Next Wave Automation CNC PIRANHA XL Owner's Manual

This warranty does not apply to defects arising from normal wear and tear, misuse, abuse,
negligence, accidents, unauthorized repair or alteration, or lack of maintenance. This warranty
is void if the CNC Piranha FX/XL machine or any portion of the CNC Piranha FX/XL machine is
modified without the prior written permission of Next Wave Automation, LLC, or if the CNC
Piranha FX/XL machine is located or has been used outside the country of residence of the
authorized CNC Piranha FX/XL machine distributor from whom the CNC Piranha FX/XL machine
was purchased.
Please contact Next Wave Automation to take advantage of this warranty. If Next Wave
Automation determines the CNC Piranha FX/XL machine or CNC Piranha FX/XL accessory is
defective in material or workmanship, and not due to normal wear and tear, misuse, abuse,
negligence, accidents, unauthorized repair or alteration, or lack of maintenance, then Next
Wave Automation will, at its expense and upon proof of purchase, send replacement parts to
the original retail purchaser necessary to cure the defect. Next Wave Automation will repair
the CNC Piranha FX/XL machine or CNC Piranha FX/XL accessory provided the necessary CNC
Piranha FX/XL machine component is returned to Next Wave Automation, shipping prepaid,
with proof of purchase and within the warranty period.
Next Wave Automation disclaims any and all other express or implied warranties, including
fitness for a particular purpose. Next Wave Automation shall not be liable for death, injuries to
persons or property, or incidental, consequential, contingent or special damages arising from
the use of the CNC Piranha FX/XL machine.

Safety

The CNC Piranha FX/XL, along with a router or other power tool, is a computer-numerically-
controlled (CNC) routing system. As such, it is a powerful system that can reduce your
woodworking risks by providing a method of cutting wood and other materials without having
to interact with the cutting tool(s) or material during the fabrication process. As with all power
tools, your care and attention are required to ensure that you use your CNC Piranha FX/XL
safely. Next Wave Automation assumes you will use your CNC Piranha FX/XL safely and follow
accepted safety precautions and practices for woodworking and machining.

Emergency Stop

There are 3 ways you can immediately stop your CNC Piranha FX/XL. CNC Piranha FX/XL users
should use a surge suppress power strip with an on/off switch.
The first is the E-STOP! button on the CNC Piranha FX/XL LCD Pendant when the unit is running.
April 2018
CNC Piranha FX/XL | 4