Prior Using For The First Time - BOMANN GSPE 892 Instruction Manual

Connect the water drain hose Connect the water drain ho
Connect the water drain ho Connect the water drain ho
NOTE: : : : NOTE
NOTE NOTE
The drain hose has a length of approx. 1.5 m and
can extend with a suitable hose and connecting
piece to a length of max. 4 m.
CAUTION: CAUTION:
CAUTION: CAUTION:
In order to prevent backflow of contaminated water,
the free end of the hose must not come under the
water level of the drain.
• Always make sure that the hose is not bent or
squeezed.
• It is allowed to install the hose maximal up to a
height of 1000 mm above the rinsing floor.
• Secure the drain hose securely to avoid a change
in position and with it a water leakage.
Electrical connection Electrical connection Electrical connection Electrical connection
WARNING: WARNING: WARNING: WARNING:
• The installation to the mains supply must conform
to the local standards and regulations.
• Improper connection may cause to an electric
shock shock! shock shock
• Do not use multiple sockets or extension cords.
• It is not allowed to modify the plug provided with
the appliance! If the plug does not fit properly to
the outlet, let install a proper outlet by an author-
ized specialist.
• The accessibility of the power plug must always
be ensured in order to disconnect the device from
the power supply in case of an emergency.
• Make sure that the voltage supply matches the
specifications on the rating label (door frame) be-
fore connecting.
se
se se
• Connect the drain hose to a
drain pipe (B) with a mini-
mum diameter of 40 mm;
alternatively the drain hose
can be fixed directly to the
sink (A).
electric electric electric
• Connect the mains cable to a properly installed
and earthed wall outlet.
• If the plug after installation is not accessible, a
corresponding disconnect device must be availa-
ble to meet the relevant safety regulations.

Prior Using for the first Time

Pri Pri Pri or Using for the first Time or Using for the first Time or Using for the first Time
Before using your dishwasher for the first time: Before using your dishwasher for the first time:
Before using your dishwasher for the first time: Before using your dishwasher for the first time:
A. Filling salt into the salt container (water softener)
B. Fill the rinse aid dispenser
C. Fill in detergent
CAUTION: CAUTION: CAUTION: CAUTION:
• Use only salt, rinse aid and detergent for dish-
washers. Other products may damage the appli-
ance.
• Always consider the dosage and storage recom-
mendations on the sales packaging.
WARNING: WARNING: WARNING: WARNING:
Keep salt, rinse aid and detergent out of reach for
children.
A. Filling salt into the salt container (water softener) A. Filling salt into the salt container (water softener) A. Filling salt into the salt container (water softener) A. Filling salt into the salt container (water softener)
Water Water Water softener Water softener softener softener
The water hardness varies regionally. If hard water is
used in the dishwasher, deposits form on the dishes
and kitchen utensils. The appliance is equipped with
a water softener, that removes lime and minerals
from the water by using water softening in the salt
container. Your local water authority can advise you
on the hardness of the water in your area.
Adjusting the salt consumption Adjusting the salt consumption Adjusting the salt consumption Adjusting the salt consumption
The salt consumption can be adjusted according to
your water hardness and therefore optimally regulat-
ed.
• Turn on the appliance.
• Press the Program selection button for more than
5 seconds, the setting mode is now activated for
approx. 60 seconds.
8