Troubleshooting - BOMANN GSPE 892 Instruction Manual

• Drain the water from the inlet hose and the water
valve.
• Reconnect the inlet hose to the water valve.
• Turn off the lid of the salt container and take off
the filter system. Remove the remaining water in
the sump with an absorbent sponge.
Tr Tr Tr Troubleshooting oubleshooting
oubleshooting oubleshooting
Before you contact an authorized specialist Before you contact an authorized specialist
Before you contact an authorized specialist Before you contact an authorized specialist
Problem Problem Problem Problem Possible cause / Action Possible cause / Action Possible cause / Action Possible cause / Action
Appliance is ∙ Check the power supply. ∙ Is the appliance
not working turned on and the door securely closed?
/ starting ∙ Is a program selected? ∙ Is the water supply
properly connected and the water supply
opened?
Water is not ∙ Check the drain hose.
drained off ∙ Are the filters or the kitchen sink clogged?
Noises ∙ A clicking sound on opening of the deter-
gent container is normal. ∙ Make sure that all
dishes are secured in the dishwasher.
∙ Place the parts so that the spray arms can
rotate freely.
Foaming ∙ Use only special dishwasher detergent to
avoid foaming. If this occurs, open the door
and let suds evaporate. Add approx. 4 liter
cold water to the tub. Start a short rinse cycle
to drain out the water. ∙ Always wipe up
spilled rinse aid immediately.
Flat table- ∙ Select a stronger program.
ware are ∙ Make sure that the action of the detergent
not clean dispenser and spray arm is not blocked by
large dishes.
Spots and ∙ Extremely hard water ∙ low inlet temperature
filming ∙ overloading the baskets, improper loading
∙ old or damp detergent ∙ empty rinse dis-
penser ∙ incorrect dosage of detergent
Cloudiness Use less detergent if you have soft water and
glassware select a shortest cycle to rinse and clean
glassware.
Black or Aluminum utensils have rubbed against dish-
grey marks ware. Use a mild abrasive cleaner to elimi-
nate those marks.
Problem Problem Possible cause / Action Possible cause / Action
Problem Problem Possible cause / Action Possible cause / Action
Stains on Only use detergents without colorants.
inner sur-
face
Yellow or ∙ Tea or coffee stains: Using a solution of ½
brown film cup of bleach and 3 cups of warm water to
on inside remove the stains by hand. ∙ Iron deposits in
surface water can cause an overall film. Call a water
softener company for a special filter.
White film Hard water minerals: clean the interior by
on inside using a damp sponge with dishwasher deter-
surface gent. Wear rubber gloves.
Dispenser Clogged detergent residue is blocking the
doesn't catch. Clean the catch.
close
properly
Detergent Improper loaded dish is blocking the dis-
left in dis- penser.
penser
Unsatisfac- ∙ Improper loading ∙ too less rinse aid
tory drying ∙ dishes are removed too soon ∙ wrong pro-
result gram has been selected ∙ use of cutlery with
a low-quality coating
Error codes Error codes Error codes Error codes
For some malfunctions, the device displays the
following error codes to warn you:
C C C C ontrol lamps ontrol lamps
ontrol lamps ontrol lamps
Meaning / possible cause Meaning / possible cause Meaning / possible cause Meaning / possible cause
flas flas flashes flas hes hes hes
Water inlet fault! Faucet not open, inlet
Rapid
blocked or water pressure too low.
ECO ECO
ECO ECO Eco Overflow / water leakage!
CAUTION: CAUTION:
CAUTION: CAUTION:
• If overflow occurs, turn off the main water supply
before calling an authorized technician.
• If there is water in the lower housing part due to
an overfilling or a small leak, remove this water
before restarting the appliance.
NOTE: NOTE: NOTE: NOTE:
If a problem still persists after following the steps
above, please contact your distributor or an author-
ized technician.
16