Table of Contents
Advertisement
Solving
common
ice maker/dispenser
problems
PROBLEM
Ice dispenser
won't work
CAUSE
SOLUTlONS
l
Freezer door open
l
Close the freezer door.
l
Ice bin not properly
l
Make sure bin is pushed in all the way.
installed
l
Wrong ice in bin
l
Use only crescents from ice maker.
Shake the bin occasionally
to keep cubes
separated and to obtain increased
storage capacity.
l
Dispenser not used
l
Dump old ice
and
make a new supply.
for extended periods,
causing ice cubes to
melt together
Ice dispenser
l
Ice dispenser bar
stops working
held in too long
l
Wait about 3 minutes for the dispenser
motor to reset.
l
Large amounts of ice should be taken
from the bin,
not through the dispenser.
Removing
the base grille
To remove the grille:
1. Open both doors.
2. Pull base grille forward to release the
support tabs from the metal clips.
3.
Do not remove Tech Sheet
fastened
behind the grille.
To replace the grille:
1.
Line up grille support tabs with metal
clips.
2. Push firmly to snap into place.
3. Close the doors.
See cleaning instructions
for defrost pan and
condenser coils on page 18.
Condenser
14
Advertisement
Table of Contents
