Table of Contents
Advertisement
lnstalling
it properly
1.
Allow l/i inch (1.25 cm) space on each
side and at the top of the refrigerator for
ease of installation.
2. If the refrigerator is to be against a wall,
you might want to leave extra space on
the hinge side closest to the wall so the
door can be opened wider.
3. The refrigerator can be flush against the
wall.
/
IO
(ID.
I I
-
I
InI
Leveling
it
Your refrigerator has 2 front leveling
screws+ne
on the right and one on the left.
To adjust one or both of these, follow the
directions below.
1.
Remove base grille. (See page 14.)
2. To raise front, turn screw clockwise.
3. To lower front, turn screw counterclock-
wise.
4. Check with level.
5. Replace base grille. (See page 14.)
Front
Front
roller
roller
AI
Right to raise;
left to lower.
left to lower.
Use a
Use a screw-
screw-
6
Advertisement
Table of Contents
