Changing The Light Bulbs; Removing The Base Grille - Roper RT18HD Use And Care Manual

Changing the light bulbs
Electrical Shock Hazard
Before removing a lighl bulb, either
unplug the refrigerator or disconnect the
electricii leading to the refrigerator at
the main power supply.
Failure to do so codd resufi in electriil
shock or personal injury.
To change the refrigerator IlgM:
1. Disconnect refrigerator from power supply.
2. Reach behind the Control Panel to remove
bulb.
3. Replace with a 40-watt appliance bulb.
4. Reconnect refrigerator to power supply.
NOTE: Not all appliince bulbs will ffi your
refrigerator. Be sure to replace a bulb with
oneofthesamesizeandshape.
Removing the base grille
To remove the grille:
1. Open refrigerator door.
2. Pull base grille forward to release the
support tabs from the metal clips.
3. Do not remove Tech Sheet fastened
behind the grille.
To replace the grille:
1. Line up grille support tabs with metal clips.
2. Push firmly to snap into place.
3. Close refrigerator door.
See cleaning instructions for defrost pan and
condenser coils on page 15.
12