Mio FUSE User Manual page 27

Your FUSE must have firmware version 1.20 or higher to enable sleep tracking. Check
your FUSE firmware version in Mio GO, at the bottom of the device's Setup screen. If your firmware needs
updating, follow these instructions for iPhone/IOS and instructions for Android.
In sleep mode, FUSE tracks your sleep duration, resting heart rate, level of sleep (awake/light/deep), and
sleep efficiency.
Activate Sleep Mode
Touch and hold both Scroll Touchpoints until the display changes from "HOLD" to "SLEEP?".
Tap the Heart Rate/Timer Touchpoint to confirm that you want to go to sleep. FUSE will display a good
night message.
The display will show "ZZZ" any time you touch a Touchpoint while your FUSE is in Sleep Mode.
Wake Up from Sleep Mode
When you wake up, turn off Sleep Mode using the same steps – touch and hold both Scroll
Touchpoints until the display says "WAKE?". Tap the Heart Rate/Timer Touchpoint to confirm. FUSE will
display a wakeup greeting and then show the time.
View Sleep Stats
To see a summary of your sleep, sync your FUSE to the Mio GO app. Your sleep session will sync, along
with your all-day data and any workouts you have completed.