Data Storage and Transfer 10 Connecting to a Receiving Device HAVE ANY QUESTIONS ABOUT YOUR MIO FUSE? We’re ready to help! Your complete satisfaction is our goal, so your feedback is crucial. If you have any thoughts, questions, or concerns, just contact our knowledgeable support team at: facebook.com/mioglobal...
IMPORTANT SAFETY INFORMATION Be sure to consult your doctor before beginning a new exercise program. While Mio FUSE provides accurate heart rate measurements, it is not a medical device. The Mio FUSE and USB charger contain strong magnets. If you use a pacemaker, defibrillator, or other implanted electronic devices, consult your doctor before using a Mio FUSE.
Charging 1. Warning: Make sure the two charging pins on the back of Mio FUSE are dry. If they are wet, pat them gently with a dry towel. 2. Plug the USB charger into the USB port of your computer.
Page 5
For important battery care and battery safety information, please see Battery Care. Setup Initial set up of the Mio FUSE must be done through the Mio GO app. Download Mio GO onto your smartphone from: After Mio GO is installed, open the app and follow the set up instructions.
Mio GO app. See Set Up for more information. Mio FUSE stores up to 14 days of daily summary data. If Mio FUSE runs out of memory during All-Day Mode, it will start overwriting the oldest daily summary data. Please see Data Storage and Transfer for more information.
Page 7
4. If you are using Mio FUSE with an ANT+ sport device, wear both devices on the same arm for a better ANT+ connection. Important: For optimal heart rate accuracy, especially if you often have cold hands or poor circulation, we strongly recommend doing a warm up exercise for a few minutes before you begin to track your heart rate.
Set a daily goal for steps taken, distance travelled, or calories burned. Track your progress towards the goal each day on the goal progress screen. ARM POSITION Select in Mio GO whether you will wear Mio FUSE on your left or right arm. The screen orientation will automatically change to reflect your selection. Note that in the Left arm position, Touchpoint will be above the display, and in the Right arm position, Touchpoint will be below the display.
Choose between Training Zone Mode (5-Zone) and Zone Alert Mode (1-Zone), and customize the upper and lower boundaries of each HR zone using the Mio GO app. The default mode is 5-Zone Mode. Please see Set Up for more information.
Bluetooth devices. 2. Open the app that you would like to pair with and add your Mio FUSE as a heart rate sensor. The setup process varies by app, but the option to add a heart rate sensor is typically found in the Settings menu.
Do not expose Mio FUSE to high temperatures. • Use your Mio FUSE in the temperature range of 5°C to 45°C (41°F to 113°F). • Store the Mio FUSE in the temperature range of -5°C to 55°C (23°F to 131°F).
Do not expose the Mio FUSE to strong chemicals such as gasoline, cleaning solvents, • acetone, alcohol, or insect repellents. Chemicals can damage the seal, case, and finish. After swimming, rinse Mio FUSE with tap water and gently dry with a soft cloth. • USING MIO FUSE IN WATER Mio FUSE is water resistant up to 30 meters and can be worn while swimming.
The “Limited Warranty Period” starts on the date of purchase and lasts for one year, ending on the first anniversary of the date of purchase. Your store/dealer (or its importer or distributor) may have offered you a longer warranty period as part of the sale; Mio Global is not responsible for such longer warranty period so please contact your store/dealer for more information.
3. problems arising from alteration of the Mio product, such as moisture or water damage sufficient to affect the proper function of the product, and damage to the product case or visible cracking of the face; 4. problems arising from the use of the Mio product with any product, accessory, software and/or service not manufactured or supplied by Mio Global; or 5.
Need help?
Do you have a question about the Fuse and is the answer not in the manual?
Questions and answers