Figure 80. Installing the memory module
d. Close the memory module retainer.
Figure 81. Closing the memory module retainer
6. Reinstall the computer cover and reconnect the cables. For details, see "Completing the parts
replacement" on page 64.
Replacing the M.2 storage drive
Attention: Do not open your computer or attempt any repairs before reading the Important Product Information
Guide.
1. Remove any media from the drives and turn off all connected devices and the computer.
2. Disconnect all power cords from electrical outlets and disconnect all cables that are connected to the
computer.
3. Remove the computer cover. For details, see "Removing the computer cover" on page 28.
4. Remove the bottom cover. For details, see "Replacing the bottom cover" on page 56.
5. Replace the M.2 storage drive.
a. Unlock the M.2 storage drive clip.
.
Chapter 4
Replacing hardware
59