2. Disconnect all power cords from electrical outlets and disconnect all cables that are connected to the
computer.
3. Remove the computer cover. For details, see "Removing the computer cover" on page 28.
4. Remove the storage drive if necessary. For details, see "Replacing the storage drive for 10TF, 10TG,
10TH, 10TJ, and 10TK models" on page 30.
5. Remove the heat sink if necessary. For details, see "Replacing the heat sink" on page 36.
6. Depending on your computer model, refer to one of the following to replace the Wi-Fi card.
• Type 1
a. Remove the Wi-Fi card shield.
Figure 44. Removing the Wi-Fi card shield
b. Disconnect the Wi-Fi antennas.
Figure 45. Disconnecting the Wi-Fi antennas
c. Remove the Wi-Fi card.
.
Chapter 4
Replacing hardware
41