Sample Deck Mapping - Native Instruments TRAKTOR KONTROL X1 Manual

▪ Effect Knobs – Recalibrate Button: Over the course of a product's lifetime, the top eight
analog knobs may acquire a certain amount of drift. Clicking on this button will start
a routine that will calibrate the TRAKTOR KONTROL X1 knob's absolute range and
position to TRAKTOR. TRAKTOR will prompt you to turn all of the knobs left, right,
and center.
▪ LEDs – On-State/Off-State Brightness: Adjusts the intensity of the TRAKTOR KON-
TROL X1's LEDs. On- and Off-state brightness can be adjusted individually.
▪ Page/Layer Switches: Adjusts the behavior of the SHIFT and HOTCUE buttons from a
Hold (Gate) action to a Toggle action.
▪ MIDI Mode: Checking this box will enable the TRAKTOR KONTROL X1 to switch to
MIDI mode when simultaneously pressing Shift + Hotcue.
The former sections Single Controller and Two Controllers have been replaced by one sec-
tion called Default Setups.
The Default Setups section
▪ Mapping: This option will allow you to choose which TRAKTOR Deck pairs will be con-
trolled by each TRAKTOR KONTROL X1, whether you use one or two controllers.
Choose the desired Deck pairs and click
fault.
▪ Swap Sides: The Swap command will execute a 1:1 mapping exchange of the two
TRAKTOR KONTROL X1 controllers, regardless if the mappings are as default or have
been changed.
6.1

Sample Deck Mapping

With this version of TRAKTOR PRO 2, a new Sample Deck mapping for the TRAKTOR
KONTROL X1 is available. It allows you to fully control your Sample Decks with the TRAK-
TOR KONTROL X1 controller.
Restore to restore their mappings back to de-
TRAKTOR KONTROL X1 - Manual - 23
TRAKTOR KONTROL X1 Preferences
Sample Deck Mapping