Using The Traktor Kontrol X1 With Traktor Pro 2; Effects Section - Native Instruments TRAKTOR KONTROL X1 Manual

4

Using the TRAKTOR KONTROL X1 with TRAKTOR PRO 2

This chapter details the use of the TRAKTOR KONTROL X1 with TRAKTOR PRO 2 soft-
ware and offers in-depth explanations of the TRAKTOR KONTROL X1's default mappings.
Accessing Primary and Secondary Functions
Each TRAKTOR KONTROL X1 button has a primary and secondary function, as labeled di-
rectly on the TRAKTOR KONTROL X1. Primary functions are direct, just press the desired
button. To access the secondary functions, hold the SHIFT button while pressing the de-
sired button. For example:
1. Press FX 1 ON button (top right) to turn TRAKTOR's FX 1 effects unit ON. Pressing
the button again will turn the effect off.
2. Hold SHIFT and press FX1 ON (top right) to switch the effect unit to the next FX.
When using the Sample Deck mapping, not all TRAKTOR KONTROL X1 buttons have a sec-
ondary (SHIFT) function. For further information, please refer to section
Mapping.
4.1

EFFECTS Section

Eight high resolution knobs and eight buttons make up the effects section allowing control
of two TRAKTOR PRO 2 effect units simultaneously.
Using the TRAKTOR KONTROL X1 with TRAKTOR PRO 2
↑6.1, Sample Deck
TRAKTOR KONTROL X1 - Manual - 13
EFFECTS Section