Advertisement
User Guide
ACN VoIP Service
Setting up your ACN VoIP Service ( Continued )
Step
1.
Connect the provided Power Pack and cable to the back of the ATA in the port labeled "DC12V"
4
Step
1.
Plug the other end of the Power Pack into a Power Outlet/Wall Socket.
5
Step
1. Turn on the Power for your ATA at the wall socket
6
The ATA will automatically attempt to connect to ACN and then download and register
your ACN VoIP service. The LED lights on the front of the ATA will flash
Please allow up to 10 minutes for this process to complete. You will know when this has
been completed when all 4 LED lights on the front of the ATA are constantly
shown below. If your ATA does not have all 4 lights
to the Troubleshooting Guide below for assistance.
Your ACN VoIP Service setup should now be complete.
working correctly by making a call from the phone connected to the ATA. If you are unable to hear a
dial-tone or successfully make a phone call, please refer to the Troubleshooting Guide on the next page.
©2017 ACN Inc. All rights reserved
MKTG-59 10.05.2017
GREEN
ACN Pacific Pty Ltd
ABN 85 108 535 708
GREEN
on and off.
GREEN
as
after 10 minutes, please refer
We recommend you confirm that the service is
Customer Service 1300 881 778
Front view of your ATA
www.acnpacific.com
Page 3 of 6
Advertisement
