Advertisement
User Guide
ACN VoIP Service
Setting up your ACN VoIP Service
It's important to follow the steps below in the order indicated to ensure your new ACN VoIP Service functions correctly.
Specifically, DO NOT plug the ATA into a power socket until you are instructed to do so in Step 5 and 6.
Step
1.
Connect one end of the provided Ethernet cable, to the port marked "Internet" on the back of the ATA.
1
Ethernet cable
Step
Connect the other end of the Ethernet cable, to a spare "Ethernet or LAN" port on the back of your broadband
1.
2
modem/router (may also just be marked 1 to 4 depending on the number of ports the device has)
Note:
Do not connect this cable to the port marked WAN, as this is used for your incoming Internet service.
Step
1.
Plug your existing phone cable into the port labeled "phone" on the back of the ATA. If you are using a DECT
3
device, plug into the main base station.
©2017 ACN Inc. All rights reserved
MKTG-59 10.05.2017
Analogue Telephone
Adaptor (ATA)
Ethernet cable
ACN Pacific Pty Ltd
ABN 85 108 535 708
Ethernet cable
Analogue Telephone
Adaptor (ATA)
Customer Service 1300 881 778
Analogue Telephone
Adaptor (ATA)
Landline phone
www.acnpacific.com
Page 2 of 6
Advertisement
