Roland HandSonic HPD-15 Owner's Manual page 37

VeloCurve: Linear, Exp1–2, Log1–2, Spline,
Loud1–2, Fix1–16
Selects how striking force will affect the volume.
Linear: This is the normal setting and most
natural correspondence between
velocity and volume change.
Compared to Linear, a wider volume
Exp1, Exp2:
change will occur for stronger hits.
Log1, Log2: Compared to Linear, a wider volume
change will occur for softer hits.
Loudness
Striking force
Linear
Spline
Edit Parameters Block Diagram
fig.2-09.e
Sound
Generator
Pad
D Beam
Inst
Ribbon
Pad Level
Pitch
TrigMode
Decay
VeloCurve
Color
Sweep
Exp2
Exp1
Loud1 Loud2
MULTI-FX/LFO
Pan
+
Fx Rev Send
MULTI-
EFFECTS
Chapter 2 Modifying a Patch
Spline: Variation in striking force will produce
extreme change.
Loud1, Loud2: Variation in striking force will produce
little change, and a constant volume
will be maintained.
Fix1–16: The sound will play at a fixed volume
regardless of how strongly you strike.
Fix1 will produce the lowest volume,
and Fix16 will produce the highest
volume.
fig.2-08.e
Log1
Fix1
L R
Reverb Send
+
REVERB
FxOut Volume
+
Log2
Fix16
MasterVolume
OUTPUT
37