Playing Various Sounds; Controlling Pad Sounds - Roland HandSonic HPD-15 Owner's Manual

Playing Various Sounds

Let's use the patch (p. 21) of P0101 Conga to hear various sounds from the
pads, ribbons, and D Beam.
* If the following screen is not shown, turn [PATCH/VALUE] until the following
screen appears.
fig.1-09
P01 LATIN
01
fig.1-10
Timbale
(Low)
Bongo
(Low)
Bongo
(High)
Guiro

Controlling Pad Sounds

Let's use the patch (p. 21) of P0201 Talking Drm and use the ribbons, D
Beam, and other pads to control the pitch of the pads.
* If the following screen is not shown, turn [PATCH/VALUE] until the following
screen appears.
fig.1-10a
P02 AFRICAN
01
While striking the pad, rub the ribbons or move your hand over the D Beam
to raise the pitch.
While striking the pad, press one of the pads A1–A5 will also raise the pitch.
Conga
Bell Tree
Shaker Maracas
Timbale
Tambourine
(High)
Conga Conga
(Toe/Open) (Low Open)
Conga
(Bass)
Conga Conga
(Heel/Open) (Open/Slap)
TalkingDrm
Claves
Cowbell
Agogo
Conga
Slide
Chapter 1 Quick Start
If D Beam [SOUND] is not
lit, passing your hand over
the D Beam will not
produce sound. Press
[SOUND] to make it light.
If [SOUND] located above
the ribbon is not lit,
rubbing the ribbon will not
produce sound. Press
[SOUND] to make it light.
If D Beam [CONTROL] is
not lit, passing your hand
over the D Beam will not
modify the tone. Press
[CONTROL] to make it
light.
17