Connecting Zgp323 Ice To A Pc; Ethernet Port Connection - ZiLOG GP ZGP323 ICE User Manual

After installing the OTP chip into the ZIF socket (or programming
adapter), you can program the chip using the instructions provided in
OTP Programming

Connecting ZGP323 ICE to a PC

You can connect the ZGP323 ICE to a host PC using either an Ethernet or
USB port. To connect the ZGP323 ICE to a host PC using Ethernet, see
Ethernet Port
USB port, see

Ethernet Port Connection

Follow the steps below to connect the ZGP323 ICE to a host PC using
Ethernet:
1. Connect a CAT-5 crossover cable from the PC to the Ethernet port on
Note: You can connect the ICE to an Ethernet hub using a CAT-5 patch
cable.
2. Connect the serial COM port on the PC to the SETUP serial port on
UM019606-0408
socket to accept 20/28-PDIP chip packages.Other adapters are avail-
able separately, see Z8 GP Package Support and Ordering Informa-
tion on page 34 for more information.
on page 25.
Connection. To connect the ZGP323 ICE to a host PC using
USB Port Connection
the ZGP323 ICE, see
the ZGP323 ICE using the DB9-to-DB9 serial cable, see
page 8.
Z8 GP™ ZGP323 In-Circuit Emulator
on page 15.
Figure 3.
User Manual
6
Figure 5 on
Introduction