Controlling The Equalizer - Roland SI-24 Owner's Manual

Controlling Logic RPC Pro

Controlling the equalizer

The buttons and knobs of the SI-24 correspond to the Logic RPC Pro equalizer
parameters as follows.
fig.4-01
EQ1 EQ2 EQ3
PAN knobs 1–8 will operate the equalizer (EQ GAIN 1–4, EQ FREQ 1–4).
Knob 1
Knob 2
Knob 3
Knob 4
Knob 5
Knob 6
Knob 7
Knob 8
Use the following procedure to operate the equalizer.
1. Press [EQ/SEND] to turn it on (lit).
2. As described in "Selecting channels" (p. 32), select the channel that you want to
control.
The [CHANNEL SELECT] of the selected channel will light.
3. Press EQ [ON] for the equalizer you want to operate, to turn it on/off.
When the equalizer is on, EQ [ON] will light.
4. Use knobs 1–8 to adjust the equalizer "GAIN" and "FREQ."
34
EQ4
EQ1 GAIN
EQ1 FREQ
EQ2 GAIN
EQ2 FREQ
EQ3 GAIN
EQ3 FREQ
EQ4 GAIN
EQ4 FREQ
Logic RPC PRO
ON
(FREQ)
EQ1 Hz
(GAIN)
dB
ON
(FREQ)
EQ2
Hz
(GAIN)
dB
ON
(FREQ)
EQ3 Hz
(GAIN)
dB
ON
(FREQ)
EQ4 Hz
(GAIN)
dB
equalizer
In order to control
parameters from the SI-24, you
must first make settings EQ
Type in Logic RPC Pro.
For details on the procedure,
refer to the Logic RPC Pro
owner's manual.