Roland SI-24 Owner's Manual page 12

Panel Description
MARKER button
When [MARKER] is on (lit), [0] will function as the Marker
Request button. Markers will be registered (stored) to [1]–[9].
For details, refer to "Registering a song
location—Marker Create" (p. 36).
SHORTCUT button
When [SHORTCUT] is on (lit), [0]–[9] will function as
command execution buttons.
For details, refer to "SHORTCUT button
operations" (p. 37).
SCREEN SET button
When [SCREEN SET] is on (lit), [0]–[9] will function as
screen set buttons.
For details, refer to "Recalling screens
registered to the numeric keys—Screen Set" (p. 37).
[0] –[9]
These are used as marker buttons, screen set buttons, shortcut
buttons, and system setting buttons.
For details, refer to the corresponding
section.
To use as marker buttons:
"Registering song locations—Marker Create" (p. 36)
To use as screen set buttons:
"Recalling screens registered to the numeric keys—Screen
Set" (p. 37)
To use as shortcut buttons:
"SHORTCUT button operations" (p. 37)
To use as system setting buttons:
"Making system settings" (p. 25–30)
12
Transport
These buttons operate the transport.
STOP button
Stops playback or recording.
PLAY indicator
This will light during playback or recording.
PLAY button
Starts playback.
REC (Recording) indicator
This will light during recording.
REC (Recording) button
Starts recording.
PAUSE button
Pauses song playback or recording.
REW (Rewind) button
Logic RPC Pro:
Rewind the song. Press [STOP] to stop rewinding.
Pro Tools/Cubase:
While you hold down [REW], the song will rewind.
FF (Fast-forward) button
Logic RPC Pro:
Fast-forward the song. Press [STOP] to stop fast-
forwarding.
Pro Tools/Cubase:
While you hold down [FF], the song will fast-forward.
Jog dial
This moves the time location within the song.
MASTER fader
This adjusts the overall volume.
The MASTER fader always controls the RPC-1's "R-Bus Out
1–2" fader, regardless of the CH ASSIGN (Channel Assign)
selection.