Connecting Headphones - Roland pt-2700 Owner's Manual

Getting Started

Connecting Headphones

The pt-2700 features two headphone jacks. This allows two
people to listen through headphones simultaneously, making
it very useful for lessons and when performing piano pieces
for four hands. Additionally, this allows you to play without
having to worry about bothering others around you, even at
night.
fig.3-09
1. Turn the volume all the way down by using
the [VOLUME] slider.
2. Plug the headphones into the Phones jack
on the lower-left panel of the pt-2700.
3. Use the [VOLUME] slider to adjust the
volume of the headphones.
This switches off the pt-2700 speakers. Sound will be
heard only through the headphones.
NOTE
Please use stereo headphones.
● Precautions to take when using
headphones
• To avoid damaging or severing the headphone cord, be
sure to handle the headphones by holding the phones
themselves, and grasping the plug and not the cord when
pulling the headphone plug.
• Connecting the headphones when the volume of
connected equipment is turned up may result in damage
to the headphones. Connect the headphones only after
turning the volume down completely.
• Listening at excessively high volume levels will not only
damage the headphones, but may also cause hearing loss.
Listen at appropriate levels.
12