Using Two Different Sounds For Right And Left Hands-Split Function - Roland pt-2700 Owner's Manual

Using Two Different Sounds for Right And Left
Hands—Split Function
The piano allows you to divide the keyboard into two sections, upper and lower, and to
play two different Tones. Dividing the keyboard is called "Split" and the key where the
keyboard is split is called the "Split Point."
The Split Point is at "F 3" when the power is turned on.
fig.5-20-1
1.
Hold down the TONE button for the sound that you want to include
in the split, and press the Metronome [SOUND] button.
The indicator on the TONE button you have pressed will flash.
Play the keyboard and hear that two different sounds are played in the upper and lower
sections.
The sounds will be assigned to the keyboard as follows:
GRAND PIANO
UPRIGHT PIANO
E.PIANO 1
E.PIANO 2
STRINGS
CHOIR
PIPE ORGAN
HARPSICHORD
* Chorus (p. 19) cannot be applied to the tones with ACOUSTIC BASS.
* The pedal will have no effect on what is played in the lower section of the keyboard.
2.
To cancel Split, press a TONE button with an indicator that is
extinguished.
The selected tone is effective for the entire keyboard.
Changing the Split Point
When you are using the Split function, you can change the location at which the
keyboard is split (the Split Point).
Hold down the TONE button whose indicator is blinking, and press
the note that you wish to use as the new Split Point.
The Split Point can be set from B1–B6.
The key that serves as the split point is included in the lower section.
The Split Point you set will be retained until the piano is switched off.
fig.5-20-2.e
TONE button Lower Tone / Upper Tone
ACOUSTIC BASS / GRAND PIANO
ACOUSTIC BASS / UPRIGHT PIANO
ACOUSTIC BASS / E.PIANO 1
ACOUSTIC BASS / E.PIANO 2
PIPE ORGAN / CHOIR
PIPE ORGAN / HARPSICHORD
B1
STRINGS / GRAND PIANO
STRINGS / HARPSICHORD
F 3 (The split point when the power is turned on)
Playing the Keyboard
B6
17