If the flashlight will not be used for an extended period, remove the battery, or the flashlight
◎
could be damaged by electrolyte leakage or battery explosion.
Long-term use can result in O-ring wear. To maintain a proper water seal, replace the ring with
◎
an approved spare.
Periodic cleaning of the battery contacts improves the flashlight's performance as dirty
◎
contacts may cause the flashlight to flicker, shine intermittently or even fail to illuminate for the
following reasons:
A: The batteries need replacing.
Solution: Replace batteries (Ensure batteries are inserted according to the manufacturer's
specifications).
B: The threads, PCB board contact or other contacts are dirty.
Solution: Clean the contact points with a cotton swab soaked in rubbing alcohol.
C: The battery protection board is in a protective state and unable to free from it.
Solution: Take out the battery holder and replace it, or replace the batteries.
If the above methods don't work, please contact your authorized distributor.
Included
1 x Spare O-ring, 1 x Lanyard , 1 x Holster, 1 x USB charging cable
Warning
This flashlight is a high-intensity lighting device capable of causing eye damage to the user or
others. Avoid shining the flashlight directly into anyone's eyes.