Siemens TE 803 SERIES Instruction Manual page 24

Add 0.5 l water and descaler
●
tablets in it.
●
20 minutes.
Descaling
Not enough descaling fluid.
Refill fluid start

prompt is displayed. Pour in descaling solu-
Clean and refill water tank
start

●
●
programme now runs for about 1 minute
and rinses the appliance.
Descaling
Empty drip tray
Replace drip tray
● Empty the drip tray
Replace the ilter if one is being used. The
appliance is ready for use again.
any descaler residue. Such residue can
cause corrosion. New sponge cloths may
contain salts. Salts can cause rust ilm
washed out thoroughly before use.
the milk frother.
start

. The descaling
-
again.
and reill it with
" mark.
. The descaling
and reinsert it.
Duration: approx. 8 minutes.
Cleaning and service
Descale
Clean
lashes while the differ-
The start button 8
ent cleaning processes are running. The
igures on the top right indicate the progress
of the programme.
●
mark.
à b u t t o n 3
●
Clean start

●
guide you through the programme.
Empty drip tray
Replace drip tray
● Empty the drip tray
appliance rinses twice.
Position swivel arm
●
clicks into place.
Cleaning
Open powder compartment
●
Insert Siemens cleaning tablet
and close drawer
●
and close it.
Press start
●
7 minutes.
Cleaning
 start
.
; the display
and reinsert it. The
.
. The clean-