Cr16 Mechanism Ageing Mode - Panasonic SA-PM31P Service Manual

SA-PM31P / SA-PM31PC

11.8. CR16 Mechanism Ageing Mode

To enter into ageing mode:
1. Enter a Doctor mode.
2. Press [2] button on the remote control. It enters into ageing mode (See Fig. 11.8).
Ageing process:
1. Tray 1 open.
2. It waits for 1 second (Note: Do not put any disc into the tray).
3. Tray 1 close.
4. TOC READ (Reading incomplete).
5. Tray 2 open and repeat process 1 to 4. (Process repeat until Tray 5).
6. Tray check.
7. Whole process complete (Counter on FL increase by 1).
Note: To exit ageing mode, press [
shows "GOODBYE". This is to avoid tray jam problem.
POWER] button. The unit will power down. Do not unplug the power cord until FL display
Display Example: [00000T3OP]
[00000T3CL]
[00000T3RE]
[00000T3CH]
...TRAY OPEN
...TRAY CLOSE
...TOC READING
...TRAY CHANGING
54