JVC UX-TB30B Service Manual page 9

3.2.3 Removing the CD mechanism (See Fig.6, 7)
(1) Disconnect the connector wire from Equalizer board con-
nected to connector CN2701
(See Fig.6)
(2) Remove the four screws E attaching the CD mechanism.
(See Fig.6)
E
(3) Turnover the CD mechanism, disconnect the card wire
from pickup connected to connector
board. (See Fig.7)
(4) Disconnect the connector wire from CD mechanism con-
nected to connector CN907
of the CD door switch board.
CN2701
Fig.6
CN905 of the CD
of the CD board. (See Fig.7)
CN905
CN907
Fig.7
3.2.4 Removing the CD board (See Fig.8)
(1) Disconnect the card wire from Equalizer board connected
to connector
(2) Disconnect the connector wire from Equalizer board con-
nected to connector
(3) Remove the three screws F attaching the CD board.
CN702
E
F
CN901
3.2.5 Removing the Equalizer board (See Fig.9)
(1) Remove the three screws G attaching the Equalizer board.
3.2.6 Removing the Control board (See Fig.10)
(1) Remove the five screws H attaching the Control board.
3.2.7 Removing the USB board (See Fig.11)
(1) Remove the two screws J attaching the USB board.
CN702 of the CD board.
CN901 of the CD board.
Fig.8
G
Fig.9
H
Fig.10
Fig.11
(No.MB725<Rev.001>)1-9
J