Roland SuperNATURAL ARX-01 Owner's Manual page 60

40: MODULATION DELAY
Adds modulation to the delayed sound.
When Feedback Mode is NORMAL:
fig.MFX40a
L in
Delay
Feedback
Feedback
Delay
R in
When Feedback Mode is CROSS:
fig.MFX40b
L in
Delay
Feedback
Feedback
Delay
R in
60
Balance D
2-Band
EQ
Modulation Balance W
Modulation Balance W
2-Band
EQ
Balance D
Balance D
2-Band
EQ
Modulation
Balance W
Modulation
Balance W
2-Band
EQ
Balance D
Parameter
Feedback Mode
Delay Left #1
Delay Right #2
L out
Feedback #3
HF Damp
Rate #4
Depth
R out
Phase
Low Gain
High Gain
Balance
Level
L out
R out
Value Description
Selects the way in which delay sound is
NORMAL,
fed back into the effect (See the figures
CROSS
above.)
0–2000 ms, Adjusts the time until the delay sound is
note heard.
Adjusts the amount of the delay sound
-98– +98 % that's fed back into the effect. Negative (-
) settings invert the phase.
Adjusts the frequency above which sound
200–8000 Hz, fed back to the effect is filtered out. If you
BYPASS don't want to filter out any high frequen-
cies, set this parameter to BYPASS.
0.05–10.00 Hz,
Frequency of modulation
note
0–127 Depth of modulation
0-180 deg Spatial spread of the sound
-15– +15 dB Gain of the low frequency range
-15– +15 dB Gain of the high frequency range
D100:0W– Volume balance between the direct
D0:100W sound (D) and the delay sound (W)
0–127 Output level