Advertisement
Key and function
This key is used to restore as "0" on the weighing display.
ZERO
It can be worked when the "STABLE" is shown at the designators.
This key is used to set or remove the tare weighing
TARE
It can be worked when the "STABLE" is shown at the designators.
This key is used to change the mode.
MODE
This key is used to set the unit weight of sample in the count mode.
SET
Furthermore, it is used to set the Max. and Min. in the limit mode.
This key is used to extend the function as a spare key. It is
used to set the user parameter simply. It is also very convenient to
measure the livestock or unstable material.
Designators
NAME
It indicates the centered zero.
Zero
It indicates the stable status of weighing
Stable
It indicates the tare set.
Tare
It indicates the battery's discharge.
Batt.
FUNCTION
Advertisement
